Manufacturer, Stockist, Supplier & Exporter of Nimonic 105 Round Bar
Nimonic 105 (W. Nr. 2.4634) is a wrought nickel-cobalt-chromium-base alloy strengthened by additions of molybdenum, aluminum and titanium. It has been developed for service up to 950°C, and combines the high strength of the age-hardening nickel-base alloys with good creep resistance. Nimonic alloy 105 is produced by high frequency melting in air followed by casting in air, or, for more critical applications the alloy is produced by vacuum melting and electroslag refining. The alloy is used for turbine blades, discs, forgings, ring sections, bolts and fasteners.
Ni 54.0, Co 20.0, Cr 15.0, Mo 5.0, Al 4.7, Ti 1.3 An age-hardenable superalloy with increased aluminum for improved oxidation-resistance and strength, and high creep-rupture properties up to around 1740°F (950°C). Available as bar and extruded section.
Nimonic 105 is a nickel-cobalt-chromium alloy. The following datasheet provides an overview of Nimonic 105.
Chemical Composition
The chemical composition of Nimonic 105 is outlined in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | 51 |
| Cobalt, Co | 18-22 |
| Chromium, Cr | 14-15.7 |
| Molybdenum, Mo | 4.50-5.50 |
| Aluminum, Al | 4.50-4.90 |
| Iron, Fe | 1 |
| Manganese, Mn | 1 |
| Silicon, Si | 1 |
| Titanium, Ti | 0.90-1.50 |
| Copper, Cu | 0.20 |
| Zirconium, Zr | 0.15 |
| Carbon, C | 0.12 |
| Sulfur, S | 0.010 |
| Boron, B | 0.0030-0.010 |
Physical Properties
The following table shows the physical properties of Nimonic 105.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.01 g/cm³ | 0.289 lb/in³ |
| Melting point | 1327°C | 2420°F |
Mechanical Properties
The mechanical properties of Nimonic 105 are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength (precipitation hardened, value at room temperature) | 1150 MPa | 167000 psi |
| Yield strength (precipitation hardened, value at room temperature, @strain 0.200%) | 770 MPa | 112000 psi |
| Elongation at break (precipitation hardened) | 25% | 25% |
Thermal Properties
The thermal properties of Nimonic 105 are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@20-100°C/68-212°F) | 12.2 µm/m°C | 6.78 µin/in°F |
| Thermal conductivity | 10.89 W/mK | 75.58 BTU in/hr.ft².°F |
Annealing
Nimonic 105 can be solution heat treated at 1149°C (2100°F) and then cooled in air.
Cold Working
Standard tooling methods are used for cold working Nimonic 105. Usage of plain carbon steels is not recommended as they may produce galling. Galling can be reduced by the usage of soft die materials and heavy duty lubricants.
Welding
Welding techniques recommended for Nimonic 105 include gas-tungsten arc welding, gas metal-arc welding, submerged-arc welding and shielded metal-arc welding. Usage of a matching alloy filler metal is recommended for the welding process and if a matching filler is absent, an alloy rich in Ni, Co, Cr, Mo is can be used. during the absence of a matching filler metal.
Forming
Conventional methods and heavy-duty lubricants are used for the forming process of Nimonic 105 that as it has good ductility. A powerful equipment is recommended for this alloy as it is stronger than the commonly available steels.
Machinability
Nimonic 105 is can be machined by conventional machining methods. This alloy has higher levels of gumminess and strength, and is work-hardened during the machining process. Tooling and usage of a heavy duty machining equipment during the machining process enables minimizing work-hardening or chatter of this alloy before the cutting process. Heavy lubricants are suitable for boring, tapping, drilling or broaching operations, and coolants that are water-based are recommended for high speed operations like milling, grinding or turning.
Heat Treatment
Nimonic 105 can be heat treated in 4 four steps. The steps are as follows:
- Solution annealing for 4 h at 1149°C (2100°F) followed by air cooling.
- Heating for 16 h at 1056°C (1925°F) followed by air cooling.
- Heating for 16 h at 849°C (1560°F).
- Air cooling to reach precipitation-hardening.
Applications
Nimonic 105 is used for high temperature gas turbine components.
Specifications
BS HR3
UNS N13021
DIN 2.4634
ASTM C565
WS 2.4634
MSRR 7017
MSRR 7018
Nimonic 105
Nimonic 105, Alloy 105, Allvac 105, Werkstoff Nr 2.4634, AFNOR NK20CDA, MK20CDA, ISO NW 3021, BS HR3, UNS N13021. DIN 2.4634, ASTM C565, WS 2.4634, MSRR 7017, MSRR 7018, Nimonic 105, DIN 2.4634, WS 2.4634, BS. HR3, AICMA Ni-P61-HT, MH.14, NiCo20Cr15MoAlTi, AFNOR NCKD 20ATv, AECMA PrEn 2179-2181
We have ready stock of Nimonic 105 Round Bars. We can ship Nimonic 105 Round Bars to Lebanon, Indonesia, Greece, Venezuela, Egypt, Hong Kong, Angola, South Africa, Ghana, Kenya, Iran, Ukraine, Germany, Ecuador, Canada, Tibet, Pakistan, Italy, Spain, Macau, Bahrain, Mexico, Norway, Croatia, Turkey, Portugal, Vietnam, Chile, Israel, France, Poland, Bulgaria, Afghanistan, Chile, Oman, Lithuania, Gabon, Trinidad & Tobago,Tunisia, Mexico, Nigeria, Gambia, Libya, Algeria, United Arab Emirates, Saudi Arabia, Philippines, Jordan, Slovakia, Ireland, United States, Nigeria, Singapore, Zimbabwe, Thailand, New Zealand, Colombia, Serbia, Azerbaijan, South Korea, Iran, Bangladesh, United Kingdom, Estonia, India, Sweden, Nepal, China, Netherlands, Costa Rica, Romania, Bolivia, Poland, Namibia, Russia, Belarus, Denmark, Brazil, Puerto Rico, Switzerland, Japan, Argentina, Australia, Qatar, Hungary, Yemen, Bhutan, Belgium, Austria, Kazakhstan, Czech Republic, Mongolia, Sri Lanka, Taiwan, Morocco, Peru, Iraq, Malaysia, Finland, Kuwait. Nimonic 105 Round Bars manufactured by FountainHead Alloys are supplied to Agadir, Albufeira, Amadora, Arezzo Ballarat, Barcelona, Bari, Beja, Bergen, Berlin-Neukölln, Bilbao, Botkyrka, Bradford, Braga, Bucharest, Bursa-Osmangazi, Calderdale, Campi Bisenzio, Capannori, Cartagena, Casalecchio di Reno, Casablanca, Cascais, Castellón de la Plana, Chefchaouen, Coimbra, Copenhagen, Constanta, Donostia, San Sebastian, Dortmund, Drammen, Dublin, Dudelange, Duisburg, Erlangen, Fermo, Forlì, Fucecchio, Fuenlabrada, Geneva, Genova, Getafe, Getxo, Haifa, Hamamatsu, Hamburg, Ioannina, Izhevsk, Jerez de la Frontera, Kenitra, Kepez, Kirklees, Klaksvík, Kristiansand, Larache, Leeds, Limassol, Limerick, Lisbon, Lodi, Logroño, London Lewisham, Loures Lublin, Lutsk, Lyon, Madrid, Málaga, Manchester, Maribyrnong, Marrakech, Martil, Mechelen, Meknes, Melitopol, Melton, Messina, Mexico city, Milano, Modena, Montreal, Munich, Neuchâtel, Novellara, Odessa, Oeiras, Offenburg, Olbia, Oslo, Palermo, Paris, Parla, Patras, Pavlohrad, Pécs, Pizzo, Pompei, Pontedera, Portimao, Rabat, Ravenna, Reggio-Emilia, Reykjavik, Rijeka, Rochester, Rotterdam, Sabadell, Salt, San Giuliano Terme, Santa Coloma de Gramenet, Santa Maria da Feira, Savignano sul Rubicone, Senigallia, Setúbal, Stavanger, Strasbourg, Subotica, Sumy, Swansea, Tanger, Tenerife, Tetouan, Tilburg, Trondheim, Torino, Tortosa, Turnhout, Un. dei C. Terre dei Castelli, Valletta, Västerås, Venice, Viareggio, Vinnytsia, Viseu, Zagreb, Zaragoza, Zurich
FountainHead Alloys is ISO 9001:2015 approved. © FountainHead Alloys 1996
